Firstly, it is important to pay attention to the mixing ratio. Acrylic AB adhesive is usually composed of two components, A and B, which need to be mixed in a certain proportion to produce a chemical reaction and adhesive. Generally speaking, the mixing ratio of Agent A and Agent B is 1:1, but the specific ratio needs to be adjusted according to different brands and models of adhesives. Before mixing, carefully read the instructions and mix according to the proportions stated in the instructions to avoid affecting the quality and performance of the adhesive.

Secondly, there is the technique of applying glue. When using acrylic AB adhesive, the following points should be noted:

Before applying glue, ensure that the surface is dry, clean, and free of oil stains. If there is oil stains, solvents such as alcohol can be used for cleaning.

When applying glue, it should be applied in a certain order, starting from one side and gradually moving towards the other side to avoid repeated application.

After applying glue, avoid moving or being subjected to force before the glue dries to avoid affecting the bonding effect

If you need to accelerate the curing speed of the glue, you can use heating methods, such as using a hot air gun or ultraviolet lamp for irradiation.